Taping your club to be accurately read by the P3ProSwing™ is not a difficult or time-consuming task. When done properly, you will achieve 99.9% accuracy on your swing measurement data, and the ball flight that you see on the screen will be most representative of your swing. There are 3 different methods of taping your clubs to fit every budget.

NOTE: You do not have to tape your irons, but taping increases the accuracy of the analysis.

METHOD 1 - One Step

1. Use the supplied applicator guide to position the One Step tape. Align the high intensity reflective strip to the middle of the club face, just off the leading edge of the club.

METHOD 2 - Two Step

1. Use the black tape to cover the entire bottom surface of your club. Be sure to tape slightly up the hosel of the club to make sure there are no false reflections from that surface.
2. Use the supplied applicator guide to position the high intensity reflective strip. Align to the middle of the club face, just off the leading edge of the club.

METHOD 3 - Two Step Roll

1. Use the 1" or 4" black tape to cover the entire bottom surface of your club. Be sure to wrap the tape slightly up the hosel of the club to make sure there are no false reflections from that surface.
2. Use the supplied applicator guide to position the high intensity reflective strip. Align to the middle of the club face, just off the leading edge of the club.